1.4401 Coiliau a Stribedi Dur Di-staen
Graddau Cyfwerth
| Gradd | UNS | DIN | JIS | EN | AFNOR | BS |
|---|---|---|---|---|---|---|
| SS 316 | S31600 | 1.4401 / 1.4436 | SUS 316 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | Z7CND17‐11‐02 | 316S31 / 316S33 |
Manyleb Safonol
Lled: 1000mm / 1120mm / 1250 / 1525mm / 2000mm ac ati.
Trwch: 0.31mm-100mm
Hyd: yn unol â'ch gofynion
Gorffen Arwyneb: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, drych, Plât wedi'i rolio'n boeth (HR), Dalen wedi'i rolio oer (CR), SATIN (Wedi'i gwrdd â Gorchudd Plastig) ac ati.
Caledwch: Meddal, Caled, Hanner Caled, Chwarter Caled, Gwanwyn Caled ac ati.
Ffurflen: Coiliau, Llain ac ati.
Cyfansoddiad Cemegol
| Safon | Gradd | C. | Mn | Cr | Ni | Mo. | N. |
| EN 10028-7 | 1.4401 | ≤0.07 | ≤2.00 | 16.5-18.5 | 10.0-13.0 | 2.00-2.50 | ≤0.10 |
| EN 10088-2 | 1.4401 | ≤0.07 | ≤2.0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| EN 10088-3 | 1.4401 | ≤0.07 | ≤2.00 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| EN 10088-4 | 1.4401 | ≤0.07 | ≤2.0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| Nodweddiadol | 4401 | 0.04 | 17.2 | 10.1 | 2.1 | ||
| ASTM A240 | MATH 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| ASTM A240 | MATH 316H | 0.04-0.10 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | |
| ASTM A666 | MATH 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| IS 6911 | ISS 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| IS 6911 | ISS 316H | 0.04-0.10 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
Priodweddau Mecanyddol
| Safon | Gradd | R.t0.2 | R.t1.0 | R.m | Rockwell | HB |
| MPa | MPa | MPa | ||||
| Math o gynnyrch: Coil a dalen wedi'i rolio'n oer | ||||||
| trwch 1 mm | 300 | 325 | 630 | |||
| ASTM A240 | MATH 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | MATH 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Math o gynnyrch: Coil a dalen wedi'i rolio'n boeth | ||||||
| Nodweddiadol (trwch 4 mm) | 300 | 350 | 600 | 170 | ||
| ASTM A240 | MATH 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | MATH 316H | ≥ 205 | ≥ 515 | ≤ 217 | ||
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Math o gynnyrch: Plât dur wedi'i rolio'n boeth | ||||||
| trwch 15 mm | 260 | 300 | 570 | |||
| ASTM A240 | MATH 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| ASTM A240 | MATH 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-2 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-4 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
