S32750 S32205 2205 2507 904L S31803 Dalen Dur Di-staen Duplex

2205 2507 904L S32750 S32205 S31803 Defnyddir cynhyrchion dalen ddur gwrthstaen deublyg ar gyfer rhannau stampio metel, rhannau offer mecanyddol mawr, a siasi. Ac ategolion electronig bach, amrywiaeth o rannau sbâr caledwedd. mae gan blât dur gwrthstaen wrthwynebiad asid, ymwrthedd alcali, cryfder tynnol a chryfder cynnyrch. Yn fwy addas ar gyfer sgleinio, dim pothelli ar yr wyneb, tyllau pin ac ati. Mae ganddo hefyd wrthwynebiad gwrth-sensiteiddio cryf i dymheredd uchel.

Gradd	2205 2507 310S 904L S32750 S32205 S31803 Dalen ddur gwrthstaen dyblyg
Proses	Rholio poeth neu rolio oer
Triniaeth arwyneb	Drych Rhif 1 / 2B / Rhif 4 / HL / Brwsio / BA / 8K / boglynnog / Ysgythrog ac ati (Gyda phapur neu ffilm PVC i'w amddiffyn)
Safon	JIS, AISI, ASTM, GB, DIN, EN, ac ati.
Trwch	Rholio oer (0.3-3mm). Rholio poeth (3-100mm)
Lled	600-2000mm neu fel y'i haddaswyd
Hyd	1000-6000mm neu fel y'i haddaswyd
Brand	TISCO, DUR BAO, BAOXIN, ZPSS, LISCO, JISCO, ac ati.
Pecyn	Pecyn Môr Allforio Safonol (Papur Kraft Gwrth-ddŵr + Paled Pren + Bwndel gyda stribed dur)
Maint Safonol	4 'x 8' ---------- 1220mm x 2348mm 4 'x 10' --------- 1220mm x 3048mm 5 'x 10' --------- 1524mm x 3048mm 5 'x 20' --------- 1524mm x 6096mm

Manyleb plât dur gwrthstaen TISCO

Amrediad goddefgarwch trwch o ddalen / plât dur gwrthstaen wedi'i rolio'n oer
Trwch	Goddefgarwch Mawr	Goddefgarwch Arferol	Goddefgarwch Bach	Dim Goddefgarwch
0.4MM	0.3-0.32	0.33-0.37	0.37-0.39	≥0.39
0.5MM	0.4-0.42	0.43-0.47	0.47-0.49	≥0.49
0.6MM	0.5-0.52	0.53-0.56	0.57-0.59	≥0.59
0.7MM	0.6-0.62	0.63-0.67	0.67-0.69	≥0.69
0.8MM	0.7-0.72	0.73-0.77	0.74-0.79	≥0.79
0.9MM	0.8-0.82	0.83-0.87	0.87-0.89	≥0.89
1.0MM	0.89-0.9	0.91-0.94	0.94-0.99	≥0.99
1.2MM	1.02-1.08	1.09-1.15	1.16-1.18	≥1.18
1.5MM	1.32-1.38	1.39-1.45	1.46-1.48	≥1.48
2.0MM	1.72-1.79	1.8-1.86	1.87-1.9	≥1.9
2.5MM	2.23-2.36	2.32-2.42	2.42-2.47	≥2.48
3.0MM	2.7-2.77	2.78-2.85	2.85-2.9	≥2.9

Amrediad goddefgarwch trwch o ddalen / plât dur gwrthstaen wedi'i rolio'n boeth
Trwch	Goddefgarwch Mawr	Goddefgarwch Arferol	Goddefgarwch Bach	Dim Goddefgarwch
3.0MM	2.6-2.75	2.75-2.85	2.86-2.9	≥2.9
4.0MM	3.5-3.6	3.6-3.75	3.76-3.95	≥3.95
5.0MM	4.5-4.6	4.6-4.75	4.75-4.95	≥4.95
6.0MM	5.4-5.6	5.6-5.75	5.75-5.85	≥5.85
8.0MM	7.3-7.5	7.5-7.65	7.65-7.85	≥7.85
10.0MM	9.2-9.3	9.3-9.6	9.6-9.85	≥9.85
12.0MM	11.1-11.2	11.2-11.6	11.6-11.85	≥11.85
14.0MM	13.1-13.2	13.2-13.6	13.6-13.85	≥13.85

Cyfansoddiad Cemegol a phriodweddau mecanyddol:

ASTM	C%	Mn%	P%	S%	Si%	Cr%	Ni%	Mo%
201	≤0.15	5.5-7.5	≤0.06	≤0.03	≤1.00	16.0-18.0	3.5-5.5	-
202	≤0.15	7.5-10.0	≤0.06	≤0.03	≤1.00	17.0-19.0	4.0-6.0	-
301	≤0.15	≤2.00	≤0.045	≤0.03	≤1.00	16.0-18.0	6.0-8.0	-
304	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-10.5	-
304L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	8.0-12.0	-
309S	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	22.0-24.0	12.0-15.0	-
310S	≤0.08	≤2.00	≤0.045	≤0.03	≤1.50	24.0-26.0	19.0-22.0	-
316	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
316L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	16.0-18.0	10.0-14.0	2.0-3.0
317L	≤0.03	≤2.00	≤0.045	≤0.03	≤0.75	18.0-20.0	11.0-15.0	3.0-4.0
321	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-12.0	-
347	≤0.08	≤2.00	≤0.045	≤0.03	≤0.75	17.0-19.0	9.0-13.0	-
405	≤0.08	≤1.00	≤0.04	≤0.03	≤1.00	11.5-14.5	≤0.60	-
409	≤0.08	≤1.00	≤0.045	≤0.03	≤1.00	10.5-11.75	≤0.50	-
430	≤0.12	≤1.00	≤0.040	≤0.03	≤0.75	16.0-18.0	≤0.60	-
434	≤0.12	≤1.00	≤0.040	≤0.03	≤1.00	16.0-18.0	-	-
444	≤0.025	≤1.00	≤0.045	≤0.03	≤1.00	17.5-19.5	≤1.00	-
403	≤0.15	5.5-7.5	≤0.04	≤0.03	≤0.50	11.5-13.0	≤0.60	-
410	≤0.15	≤1.00	≤0.035	≤0.03	≤1.00	11.5-13.5	≤0.60	≤1.00
420	0.16~0.25	≤1.00	≤0.04	≤0.03	≤1.00	12.0-14.0	≤0.75	≤1.00
440A	0.60~0.75	≤1.00	≤0.04	≤0.03	≤1.00	16.0-18.0	-	≤0.75
SAD2507	≤0.03	≤1.2	≤0.035	≤0.02	≤0.80	24.0-26.0	6.0-8.0	3.0-5.0
SAF2205	≤0.03	≤2.0	≤0.03	≤0.02	≤1.00	21.0-23.0	4.0-6.5	2.5-3.5
904L	≤0.0.3	≤2.0	≤0.035	≤0.03	≤1.00	18.0-20.0	23.0-25.0	3.0-